LEARN HOW TO LUBE YOUR MOUNTAIN BIKE
It may interest you to know that a mountain bike is a lot of amusement when in good condition. But, it does need some maintenance for you to enjoy it more. Lubricating your bike is a significant part of your maintenance checklist. It is very essential You lubricate your bike always. approximately15 hours before riding, normally not everything gets lubed as fast jobs earlier before you take off. few lube jobs can go for more rides, though you know it’s time to lube your mountain bike if you notice things get loud or shifting gets sticky.
We have basically 3 different categories of lube. They are in no particular other:
1. dry or wet chain lubricant
2. grease lubricant
3. all purpose lubricants
Here Is How to Lube Your Mountain Bike
1. Chain Lubricant
Endeavour to apply a generous amount of mountain bike lube to your chain as you move the pedals around in a backwards movement. It as well helps to discover a place to fix your hand while you move the pedals around such as the frame and around. Try as much as you can to watch out for the cranks and chain rings as they move around.
2. The Front Derailleur
The pivots on the front derailleur should be lubed. Make sure you use a spot of lube everywhere you can see movement whenever you move the shift lever.
3. The Rear Derailleur
Similar to the front deraileur, make sure you lube the pivots. The pivots on the rear derailleur should be lubed. Make sure you use a spot of lube everywhere you can see movement whenever you move the shift lever.
4. The Pedals
We have some pedals that are clipless. They don’t clip. This type of pedals needs to have the released mechanism lubed. You are required to only lube this mechanism if you have the clipless type of pedal.
5. Everything into Motion
Now you put everything into motion. The chain, the rear derailleur, the front derailleur and the Pedals. Pedal around, change your gears, and bounce your bike from one place to another. If you hear anything squeak or screech, when you bounce your mountain bike around, something is definitely not right. There is a moving part that needs to be lubed as soon as possible without waste of time.
6. Wipe It All Clean
As soon as you finish lubricating everything, endeavour to wipe it all
around, you achieve this by simply wiping it all back off. Use a clean rag
to smooth clean all the used lube, as well as all the lube used in the chain. Be reminded that wiping it away you must ensure the lube is in between the parts you can only clean away every other place it isn’t needed. This will keep your mountain bike from accumulating dirt while you ride.